WASPE 100K 4-in-1 Summer Restock Guide: 100,000 Puffs, Quad-Profile Switching, and Mesh Coil Variety

Summer restock planning is not only about chasing the biggest puff count. Retailers need products that make sense on the shelf, are easy to explain in a busy shop, and give customers enough profile variety without turning the order into a messy SKU list. WASPE 100K 4-in-1 fits that lane well because it combines 100,000 puffs, four switchable profile chambers, 56ml total device fill, and 1.0 ohm quad mesh coils in one device.

For retailers serving customers in Spain, Germany, the Netherlands, France, or Poland during the late-summer buying window, the goal is simple: carry something bigger than a standard 40K or 60K device without making the choice difficult to explain. WASPE 100K 4-in-1 sits between single-profile options like WASPE Bar 60K and larger multi-profile models like WASPE Crystal 180K. That middle ground makes it a practical summer restock option within the wider WASPE disposable vape range.

WASPE 100K 4-in-1 gives retailers variety without overloading the shelf

The first thing that matters commercially is the format. WASPE 100K 4-in-1 uses four separate profile chambers, with the advertised 100,000 puffs split as 4 x 25,000 puffs. That gives customers variety in one device while keeping the buying decision clean. Instead of asking a customer to choose one profile for the next few weeks, you can show them one device with four profiles inside.

For wholesale buyers, the four-chamber format can simplify late-summer assortment planning. Instead of carrying separate cartons only to add profile variety, shops can offer four choices inside one device while keeping the range easier to explain.

This product view shows how the four-sided format differs from a standard single-profile disposable. It gives shop staff a clear visual reference when explaining the chamber-switching layout.

100,000 puffs, 56ml capacity, and quad mesh coils

100,000 puffs is a useful number for shops because it is big enough to sit in the high-puff category without becoming a hard sell. The product page lists 56ml total device fill, split across four 14ml chambers. Each chamber runs on its own 1.0 ohm mesh coil, so the profile system is not just a label on the box. The device is built around separate profile use, not only a single tank with a novelty switch.

The battery is listed as 650mAh rechargeable Type-C. That is important for a 100K device because buyers expect to recharge and keep using it rather than treating it like a short-cycle disposable. The listed dimensions are 47 x 47 x 113mm, so it is a bigger shelf item, but still easy to present as a single unit rather than a boxy gadget.

Profile sets: practical starting points for a summer restock

For a first mixed order, begin with Watermelon Ice & Strawberry Kiwi & Raspberry Watermelon & Lemon Lime, plus Blueberry Ice & Black Knight & Strawberry Ice & Strawberry Watermelon. These two sets combine familiar iced-fruit and berry profiles, giving a shop a straightforward baseline before adding sweeter or drink-inspired combinations.

Fruit and ice combos: Watermelon Ice, Strawberry Kiwi, Raspberry Watermelon, Lemon Lime, Grape Ice, and Strawberry Raspberry Cherry give a first order broad fruit coverage without making the selection entirely tropical or drink-led.

Berry and candy-heavy sets: Strawberry Watermelon & MR.Blue & Grape Ice & Rainbow Candy leans sweeter, while Mixed Berries & Double Apple Ice & Blueberry Raspberry & Blueberry Honey combines berry and apple profiles. Keep the opening quantity balanced unless the shop already carries similar combinations.

Tropical and summer sets: Juicy Peach Ice & Tropical Fruit & Fruit Blast & Peach Berry, plus Strawberry Banana & Strawberry Red Bull & Strawberry Mango & Pink Lemonade, suit a warm-weather display. Use them as part of a mixed order rather than making them the whole selection.

Drink-inspired and more distinctive sets: Cherry Cola Ice, Strawberry Cola Ice, Red Bull Ice, Pineapple Coconut Ice, and Triple Mango Ice add cola, energy-drink, coconut, and mango themes. Add them after the familiar fruit sets are covered, especially when the shop already carries similar profiles.

Wholesale pricing and order planning

The current product page lists the entry price at EUR 12.10 for 10-29 units, with lower unit prices as the order size increases. The lowest listed tier is EUR 6.54 at 400+ units.

At EUR 6.54 on the 400+ tier, WASPE 100K 4-in-1 reaches its lowest listed unit cost. The MOQ starts at 10 units, and the product page says profile sets and strength levels can be mixed within an order. That gives smaller shops a way to test the range without committing too heavily to one profile.

Shipping and ordering notes

WASPE 100K 4-in-1 is listed as shipping from China, with typical lead times of 10-15 business days to Europe depending on destination. Build that lead time into any late-summer promotion or replenishment plan.

The available strength levels are 0%, 2%, and 5%. The product page also lists mixed profile-set and strength-level ordering, which can help retailers build a broader starter selection.

WASPE 100K 4-in-1 compared with related WASPE options

This is where the product is easiest to position. WASPE Bar 60K is the simpler 60K option and is currently listed for EU warehouse shipping. WASPE Double Option 100K Pro adds a dual-profile screen format. WASPE Crystal 180K is the larger 8-in-1 option, with the 2% version currently listed from the EU warehouse. WASPE 100K 4-in-1 sits in the middle: bigger than a 60K, more variety than a dual-profile device, and less extensive than an 8-in-1 model.

Bottom line: choose WASPE Bar 60K when a simpler 60K format and EU warehouse availability matter most, choose the 2% WASPE Crystal 180K when you want the listed EU warehouse option with eight profiles, and choose WASPE 100K 4-in-1 when you want a balanced restock product that combines 100K capacity with four-profile variety.

Final thoughts on WASPE 100K 4-in-1

WASPE 100K 4-in-1 is not the largest device in the WASPE lineup. Its value is more practical than that. It gives retailers 100,000 puffs, 4-in-1 profile switching, 56ml capacity, Type-C charging, and a clear pricing ladder with lower unit costs at higher quantities.

For a late-summer assortment, I would position it as a variety-first restock item: one device for customers who want more profile choice and fewer separate SKUs for retailers to manage. Start with familiar fruit and berry sets, add tropical profiles for a seasonal mix, and keep the cola or energy-drink sets for shops that already carry similar choices.

The device-and-box image also gives shop staff a clear reference for the four-profile layout and the listed 10-piece box format.

Frequently Asked Questions About WASPE 100K 4-in-1

1. How many puffs does WASPE 100K 4-in-1 have?

WASPE 100K 4-in-1 is listed at up to 100,000 puffs. The product page describes this as 4 x 25,000 puffs across four profile chambers.

2. How does the 4-in-1 profile system work?

The device carries four profile chambers in one unit, letting customers switch between four profiles instead of buying four separate devices. That makes it useful for shops that want variety without carrying too many separate SKUs.

3. What is the tank capacity of WASPE 100K 4-in-1?

The listed capacity is 56ml total, split as 4 x 14ml. That capacity supports the 100K puff positioning and gives the device a clear high-puff shelf role.

4. Does WASPE 100K 4-in-1 use mesh coils?

Yes. The product page lists a 1.0 ohm quad mesh setup, with one mesh coil per chamber. That matters because multi-profile devices need clean separation between profiles.

5. Is WASPE 100K 4-in-1 available in EU warehouse stock?

The current WASPE 100K 4-in-1 product page lists China shipping with a typical 10-15 business day Europe lead time. For current EU warehouse options, WASPE Bar 60K is listed from EU stock, while WASPE Crystal 180K lists EU stock for the 2% version.

6. Which WASPE 100K 4-in-1 profiles should retailers test first?

Start with Watermelon Ice & Strawberry Kiwi & Raspberry Watermelon & Lemon Lime, plus Blueberry Ice & Black Knight & Strawberry Ice & Strawberry Watermelon. These sets combine familiar fruit, ice, and berry profiles. Add tropical, cola, and energy-drink sets when they fit the shop’s existing selection.

7. Is WASPE 100K 4-in-1 a good wholesale vape for summer?

It can fit a late-summer restock plan when the listed 10-15 business day China-to-Europe lead time is built into the order timing. Its practical advantage is combining 100,000 puffs and four profiles in one product format.